Pneumatic accessories MHZ2 series pneumatic finger cylinder parallel opening and closing air claw

Cleaning:
When the cylinder is repaired or reassembled, the parts must be cleaned to prevent the sealing ring from being cut or damaged, and pay attention to the installation direction of the dynamic sealing ring.

The surface of the cylinder should be kept clean to prevent corrosion and contamination.

Lubrication:
In use, the parts of the cylinder should be regularly checked for abnormal phenomena, such as the active parts of the cylinder installed by the shaft pin should be regularly lubricated.

For the cylinder that is not used for a long time, all the processed surfaces should be coated with anti-rust oil, and the inlet and exhaust ports should be blocked with dust.

Inspection and maintenance:
Periodically check the sealing performance of the cylinder, including the wear of the sealing ring, sealing ring and other components, and timely replace the aging and damaged seals.

Check whether the air inlet and outlet of the cylinder are blocked by foreign objects, and whether the inside of the moving cylinder is worn or loosened.