Cylinder hydraulic lock hydraulic element valve block DX-STS-01073
Details
Sealing material:Direct machining of valve body
Pressure environment:ordinary pressure
Temperature environment:one
Optional accessories:valve body
Type of drive:power-driven
Applicable medium:petroleum products
Points for attention
The outer surface of the hydraulic valve block is the installation base of the hydraulic valve components, and the interior is the layout space of the holes.
The six faces of the hydraulic valve block constitute a collection of the mounting faces of the hydraulic system.
Usually the underside does not mount components, but acts as a superposition surface with the fuel tank or other valve blocks.
In the actual installation of the hydraulic system, for the consideration of easy installation and operation, the installation Angle of the hydraulic valve is usually a right Angle
1. Top surface and bottom surface
The top surface and bottom surface of the hydraulic valve block are superimposed joints, and the surface is provided with a common pressure oil port P, a common oil return port O, a leakage oil port L, and four bolt holes.
2. Front, back and right side
① the front
a, install direction valves, such as electromagnetic directional valves, check valves, etc.;
B. When the pressure valve and flow valve are not installed on the right side, they should be installed in front for adjustment.
② rear
Install directional valves and other non-adjustable components.
③ right side
a, the installation of frequently adjusted components, pressure control valves: relief valves, pressure reducing valves, sequence valves, etc.;
b, flow control valves: throttle valves, speed regulating valves, etc.
3. Left side
The left side is provided with the output oil port connected to the actuator, the external pressure measuring point and other auxiliary oil ports: the accumulator oil hole, the oil hole connected to the standby pressure relay, etc.